How do I configure Ranger to connect to a Canon Ethernet scanner?

Started by msobleskie, June 14, 2017, 02:21:37 PM

Previous topic - Next topic

msobleskie

These instructions are for the CR-120/CR-150 Network-Enabled Scanners.

In the DriverOptions.ini for the CR-120 or CR-150 file, typically named "Canon-CR120CR150.ini", set the following option:

[EthernetConfig]
ScannerIpAddress=XXX.XXX.XXX.XX

Where the X's are the Scanner's IP address.


See also:






Ranger® - The universal check scanner interface
Copyright © 2017 Silver Bullet Technology
www.sbullet.com